B&K 50 Series II Instrukcja Użytkownika Pobierz pdf (Strona 43)

The instrument can save up to 100 instrument settings in non-volatile memory. Memory is

allocated in 10 different storage groups (group 0 to 9), and each group has 10 memory locations

to store settings (0 to 9). These memory locations are referenced by numbers 1 – 100. When

saving an instrument setting, numbers 1 to 100 can be selected. However, when recalling an

instrument setting, the group must be selected first and then the numeric keypad buttons 1

through 9 and 0, which refers to the 10 locations of the selected storage group. Below is the

table illustrating the storage group and memory location structure.

Table 4 - Save/Recall Storage Group

Storage

Group

Corresponding memory

locations for save operation

1 – 10

11 – 20

21 – 30

31 – 40

41 – 50

51 – 60

61 – 70

71 – 80

81 – 90

91 - 100

When recalling settings, each of the numeric keypad numbers corresponds to the memory

locations based on the storage group selected according to the table above. For storage group

0, recalling memory location 1 is done by pressing ; location 2 is done by pressing ,

and so on. Memory location 10 is recalled by pressing . For storage group 1, recalling

memory location 11 by pressing , location 12 by pressing , and so on.

Example:

Settings are saved to memory location 60. To recall those settings, set storage group to 5 from

the menu, then press recall and the number .

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 101 102

Brak uwag

B&K 50 Series II Instrukcja Użytkownika Strona 43